Camp Fire Grills

Posted by ClintCochems on
1381417_657712497596123_1279526827_n
1381417_657712494262790_1598841306_n

12 Inch Pumps

Posted by ClintCochems on
IMG_20130913_084144_474
IMG_20130912_171555_464
IMG_20130912_171553_074
IMG_20130912_171526_283
IMG_20130912_171522_056
IMG_20130912_171520_770
IMG_20130912_170703_301
IMG_20130817_130945_266
IMG_20130817_130941_298
IMG_20130816_192213_623
Steep slope pto pumps – 15 to 30′ long with new design for pintle hitch instead of a pin to allow more versitalty for steep slope access. Pump will go down most slopes without frame drag.

Boom Rebuild

Posted by ClintCochems on
2012-04-15_10-40-13_182
2012-04-15_10-40-08_61
2012-04-15_10-40-00_958
2012-04-15_10-39-56_558
2012-04-15_10-39-45_964
2012-04-14_20-34-29_444
2012-04-14_20-34-12_792
2012-04-14_20-34-09_701
2012-04-14_20-30-12_416
2012-04-14_20-30-01_130
2012-04-14_20-22-50_925
2012-04-14_20-22-49_684
Applicator Booms – made to custom lengths with steel and aluminum arm design. Can be made to be liquid and granular both or just single depending on customer needs.

Box Scraper

Posted by ClintCochems on
2010-06-16 15.45.20
2010-06-16 15.45.10
2010-06-16 15.44.59
2010-06-16 15.44.49
Box scraper – walking beam axles with tilt option works well with dirt, gravel, and sand. Used to maintain roads or driveways and final smoothing of a cranberry bed.

Bulkheads

Posted by ClintCochems on
IMG_20130901_191320_732
IMG_20130901_191313_722
IMG_20130514_204641
IMG_20130514_204625
IMG_20130514_204617
IMG_20130514_204607
IMG_20130514_204553
IMG_20130421_123610_351
IMG_20130421_123555_298
IMG_20130420_210002_239
Aluminum Bulkheads – we fabricate these to custom heights and lengths. Discharge tube can either be double wall culvert with o-ring seal or aluminum. Can be built to accommodate lift pumps. On larger bulkheads we offer cranks to pull up boards from the bottom of the structure. Steel Bulkheads – we fabricate these to custom heights and lengths. Discharge tube typically is double wall culvert with o-ring seal. Can be built to accommodate lift pumps. On larger bulkheads we offer cranks to pull up boards from the bottom of the structure. Bulkhead Hand Crank – built to make lifting boards easier with a tall bulkhead to typically used in flood ditches to let flood waters go with ease and not having to remove every board. The user can just hoist the boards up out of the way and allow the water to flow freely. Bulkhead Board Puller – used to remove boards to control height with ease. Our puller features a mostly hidden linkage to allow ease of use. The harder you pull the tighter it clamps the board.